水力劈裂问题的态型近场动力学建模

将态型近场动力学理论引入水力劈裂问题的模拟。构建了能反映岩土类材料准脆性断裂特征的态型近场动力学本构模型,并在物质点间相互作用力模型中加入等效水压力项,以实现在新生裂纹面上跟踪施加水压力。同时,考虑裂纹面间的接触,引入物质点间的短程排斥力作用,并设计了相应的接触算法。通过自编程序将模型和算法应用于含初始裂纹、不含初始裂纹以及含坝基软弱结构面的混凝土重力坝在高水头作用下的水力劈裂过程模拟,并与扩展有限元等模拟结果对比,验证了本文模型和算法的可行性和准确性。     

A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

Homogeneous variable exponent Besov and Triebel–Lizorkin spaces

We introduce homogeneous Besov and Triebel–Lizorkin spaces with variable indexes. We show that their study reduces to the study of inhomogeneous variable exponent spaces and homogeneous constant exponent spaces. Corollaries include trace space characterizations and Sobolev embeddings.     

非齐次动力学方程的一种精细积分单步方法

针对非齐次动力学方程■,结合精细积分法和微分求积法,利用同阶的显式龙格-库塔法对计算过程中待求的v_(k+i/s)(i=1,2,…,s)进行预估,提出了一种避免状态矩阵求逆的高效精细积分单步方法。该方法采用精细积分法计算e~(Ht),而Duhamel积分项采用s级s阶的时域微分求积法,计算格式统一且易于编程,可灵活实现变阶变步长。仿真结果表明,与其他单步法及预估校正-辛时间子域法进行数值比较,该方法具有高精度、高效率及良好的稳定性,在求解大规模动力系统时间响应问题中具有较大的优势。     

一种经验型疲劳小裂纹扩展模型

金属材料疲劳寿命由裂纹萌生和裂纹扩展寿命两部分组成，其中对于萌生寿命中的小裂纹分析是精确描述裂纹萌生寿命的关键．而小裂纹在扩展过程中由于尺寸相对较小，导致传统线弹性断裂力学预测方法失效，需要对其进行改进，考虑裂纹尖端塑性区引起的残余压应力对小裂纹扩展速度的影响．本文针对此问题进行了初步分析，通过对塑性区引起的残余应力的量化，结合小裂纹门槛值特性，提出了一种经验型修正的小裂纹扩展模型，用于定量预测裂纹的萌生寿命．使用铝合金6082-T6缺口试样进行了疲劳实验，并与理论结果进行了对比，验证了所提模型的有效性．     

Variable spaced particle in mesh-free method to handle wave-floating body interactions

In this work, the motion of a two-dimensional rectangular freely floating body under waves is simulated using Improved Meshless Local Petrov-Galerkin method with Rankine Source function (IMLPG_R) with variable spacing resolutions. The IMLPG_R method is a particle method that solves Navier–Stokes equations using the fractional step method to capture the wave properties. However, many existing particle methods are computationally intensive to model the wave-floating body due to the requirement of fine particles, needing uniform distribution throughout the domain. To improve the computational efficiency and capture the body response properly, variable spaced particle distribution with fine resolution near the floating body and coarse resolution far from the body is implemented. Numerical schemes to handle variable resolutions are reported. An iterative scheme to handle the wave-floating body is implemented in the particle method. Two test cases, one with small wave and another with steep waves, are simulated for uniform particle distribution and the result shows good agreement with literature. Based on this, the performance of the variable spaced particle distribution is tested in coupling with floating body solver. The application of the method for wave impact load from the green water loading of the floating structure is also simulated.     

Birnbaum‐Saunders distribution: A review of models,analysis, and applications

Birnbaum and Saunders introduced a two‐parameter lifetime distribution to model the fatigue life of a metal, subject to cyclic stress. Since then, extensive work has been done on this model providing different interpretations, constructions, generalizations, inferential methods, and extensions to bivariate, multivariate, and matrix‐variate cases. More than 200 papers and one research monograph have already appeared describing all these aspects and developments. In this paper, we provide a detailed review of all these developments and, at the same time, indicate several open problems that could be considered for further research.     

Infinite propagation speed of a weakly dissipative modified two-component Dullin–Gottwald–Holm system

We consider the infinite propagation speed of a weakly dissipative modified two-component Dullin–Gottwald–Holm (mDGH2) system. The infinite propagation speed is derived for the corresponding solution with compactly supported initial data that does not have compact support any longer in its lifespan.     

Statistics of reaction progress variable and mixture fraction gradients of a pulverised coal jet flame using Direct Numerical Simulation data

The statistical behaviour of the variances, covariance and gradients of the reaction progress variable (c), and the mixture fraction (ξ) have been analysed in a pulverised coal jet flame using a three-dimensional carrier phase direct numerical simulation (DNS) dataset. It has been observed that the Favre-probability density functions (PDFs) of c and ξ can be parametrised by the standard β function. Furthermore, the log-normal distribution has been found to accurately represent |?c| and |?ξ|. It is also found that ?c and ?ξ remain aligned throughout the flame brush. Finally the joint PDF of |?c| and |?ξ| has been compared with the product of the PDF of |?c| and PDF of |?ξ| extracted from carrier phase DNS, and it has been found that |?c| and |?ξ| are not statistically independent in the case investigated.The bivariate log-normal distributions with and without correlation have also been considered, and the former is found to be in better agreement with the carrier phase DNS data.     

考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.